A working car air conditioning system is very important. It keeps the inside cool during hot days. It also helps remove moisture from the air inside the car. When the AC stops working well a complete service may be needed. A full overhaul brings your system back to top condition. Here is what to expect from this detailed service.
Understanding the Need for AC Overhaul
Car air conditioners wear out over time. The parts inside can break or stop working. Sometimes the cool air stops completely. Other times the air smells bad or blows weak. These are signs that a full service is needed. A small repair may not fix the deeper issues.
A complete overhaul checks the whole system. Every part is tested and cleaned. Some parts are replaced with new ones. This makes sure the AC works like new. It is better than just fixing one part. This kind of work takes time and skill. But it also gives long-lasting results.
Inspection and Diagnosis Comes First
Every complete AC service starts with a full check. The technician first looks for visible damage. The hoses and pipes are checked for leaks. The pressure levels are tested to find problems inside.
The technician uses tools to measure performance. The air temperature and flow are recorded. The machine may be used to find hidden leaks. The goal is to understand every issue before repair. This makes the repair more accurate.
Removing and Replacing Key Components
After inspection the real work begins. Faulty parts are removed and cleaned or replaced. The compressor may be one of the first parts to check. It pushes the coolant through the system. If the compressor fails the AC will not cool.
The condenser and evaporator are also cleaned or changed. These parts help cool the air and remove moisture. The receiver dryer may be changed as well. It filters the coolant and protects the rest of the system.
The technicians at Auto AC Repair in Bend, OR offer full replacement and cleaning services. They make sure every part fits well. This careful work helps the AC run smoothly.
Refilling and Sealing the System
Once all parts are fixed or changed the system must be refilled. The coolant is added back in the correct amount. This step is very important for cooling.
The system is sealed tightly to avoid leaks. A good seal means no gas escapes. The technician may test the pressure again after refilling. This confirms the system is ready to work.
Sometimes old coolant must be removed first. It may carry dirt or moisture. Removing it helps protect the new parts. This step is done with special machines. It makes sure only clean gas runs inside.
